Adding Zwave to SEM-210 without Mobile Tech

[safey1027]

Good Evening All;
I was reading in my SEM Installation Guide about how to add Zwave devices to the ADC SEM.
It refers to “Mobile Tech” which is only for Dealers, and I am a DIY’r. Am I able to add without “Mobile Tech”, is there a work around? Thank You in Advance.

[cscarberry1997 (Charlie)]

I believe u should be a able to in the app itself as customer

[jwcsurety (Jason)]

How To Manage Z-Wave devices on a SEM-Honeywell/ADEMCO Vista

The Z-Wave controller on the SEM-Honeywell/ADEMCO Vista is built into the Alarm.com cellular module, so swapping the panel requires no action in regards to Z-Wave, while swapping the module requires the deletion and addition of any existing Z-Wave devices. It is recommended to enroll no more than 60 total Z-Wave devices and up to 5 thermostats to ensure network stability. Z-Wave network stability depends on many factors, including the number of enrolled devices, network layout, environmental in…

How to Manage Z-Wave devices on a SEM-DSC PowerSeries

The Z-Wave controller on the SEM-DSC PowerSeries is built into the Alarm.com cellular module (SEM), so swapping the panel requires no action in regards to Z-Wave, while swapping the module requires the deletion and addition of any existing Z-Wave devices. It is recommended to enroll no more than 60 total Z-Wave devices and up to 5 thermostats to ensure network stability. Z-Wave network stability depends on many factors, including the number of enrolled devices, network layout, environmental int…

[safey1027]

Downloaded the “APP”. Before You can even start, You have to log in with a “Dealer ID and Password”

[jwcsurety (Jason)]

Mobile Tech is an app only for use by dealer installers. The SEM installation guide from ADC is written for installation techs. It is not required for Z-wave device addition. Follow the steps in the how to guides on our website here for Z-wave management. In your case it looks like that would be the Powerseries version. See below.

How to Manage Z-Wave devices on a SEM-DSC PowerSeries

The Z-Wave controller on the SEM-DSC PowerSeries is built into the Alarm.com cellular module (SEM), so swapping the panel requires no action in regards to Z-Wave, while swapping the module requires the deletion and addition of any existing Z-Wave devices. It is recommended to enroll no more than 60 total Z-Wave devices and up to 5 thermostats to ensure network stability. Z-Wave network stability depends on many factors, including the number of enrolled devices, network layout, environmental int…